Until now, there have been no safe alternatives to replace the use of dangerous caustics in modern systems and cleaning applications. Sustainable Water Solutions LLC presents Sani Clean CH – the world’s only synthetic caustic high foaming replacement. Sani Clean CH can be used to maintain or increase pH, will precipitate magnesium and suppress calcium in high hardness waters. The risk of severe caustic based burns and the need for personal protective equipment are when using Sani Clean CH as compared to caustic are greatly reduced. Sani Clean CH is a non corrosive, non hazardous, non US DOT regulated, non Canadian TDG regulated, and 100% biodegradable. Sani Clean CH carries a 0,0,0, hazard rating, is non destructive and will not cause irreversible alterations in human skin tissue.

Features Advantages and Benefits
Effectively increases pH
Effectively precipitates magnesium
100% Biodegradable
Metal safe formula
No disposal of caustic soda bags
Does not donate the sodium ion
Non-skin irritant
Will not cause burns
Non toxic
Non fuming
Non mutagenic
No VOC’s
Non-destructive on human skin tissue
Excellent buffer for fluid systems
Neutralizes acid gases such as carbon dioxide and hydrogen sulfide
Extremely durable in cold temperatures
No corrosion inhibitor needed for most applications
No secondary containment needed

Typical Physical Properties
Appearance and Color: Colorless liquid
Initial Freeze Point: -10ºF (-23ºC)
Odor: Odorless
Solubility in Water: 100%
Flashpoint: None
Biodegradability: 100%
Specific Gravity: 1.32 ± .04

Storage and Handling
Sani Clean CH has a storage life of greater than one year. Keep container closed when not in use. As with all chemical products and materials, take care as to where you store them. Safety glasses are suggested for use when handling this product. No special gloves or protective equipment are required when handling this product. When pumping this product, it is strongly recommended to use manufacturer approved hose couplings or fittings. Rinse empty container with water and discard as per federal, state and local regulations. Rinse empty container with water and discard as per federal, state and local regulations.

Sani Clean CH is shipped in 5, 55, tote and bulk tanker trucks.

Directions for Use
Sani Clean CH can be utilized to maintain high pH levels in any fluid system. Due to its liquid form, requiredconcentrations may be slightly higher than typical forms of dry austic. Add to fluid or water to raise pH as needed.

Buy Now

MSDS Sani Clean CH

Request A Free Sample

[gravityform id=”2″ name=”Request a Free Sample” description=”false”]